2014 Superior 36x150TSSA Conveyor

SUPERIOR 36" X 150' SWING AXLE TELESTACKER® CONVEYOR

CONVEYOR FRAME

   - TRUSS DESIGN: HEAVY-DUTY TRUSS, DESIGNED FOR MAX STRENGTH / WEIGHT RATIO
   - MAIN CONVEYOR: 80' LONG WITH 70" DEEP TRUSS
   - STINGER: 80' LONG WITH 54" DEEP TRUSS
   - EXTENSION: CONVEYOR EXTENDS TO 150' LONG WITH HYDRAULIC CABLE WINCH
   - SAFETY STOP: MECHANICALLY STOPS RETRACTION IN THE EVENT OF CABLE FAILURE

DRIVE SPECIFICATIONS (MAIN / STINGER)

   - DRIVE: CLASS I HEAD END
   - GEAR REDUCERS: FALK SHAFT MOUNT
   - BACKSTOPS: INSTALLED IN REDUCERS
   - MOTORS: 40/40 HP 1800 RPM TEFC
   - V-BELT DRIVE: WITH DRIVE GUARD
   - CAPACITY: 1000 STPH OF 100 PCF MATERIAL, 25 DEGREE SURCHARGE (90% FINES, 10% SPHERICAL LUMPS 7" MINUS)
   - BELT SPEED: 450/650 FPM

SUPERIOR PULLEYS

   - DRIVE PULLEYS: 16" DIAMETER, 3/8" HERRINGBONE LAGGED DRUM
   - TAIL PULLEYS: 14" DIAMETER, CEMA CHEVRON® WING
   - AUTO GREASER: SUPERIOR CARTRIDGES INCLUDED
   - SHAFTS: TURNED AND POLISHED
   - BEARINGS: REXNORD
   - TAKE UPS: SCREW TYPE

PORTABILITY

   - UNDERCARRIAGE: PATENTED FB® UNDERCARRIAGE, WITH HYDRAULIC RAISE CYLINDERS, 10 HP PUMPING UNIT, AND COVERS
   - AXLE TYPE: XTP SWING TYPE AXLE
   - TRANSPORT AXLE: (8) 11-22.5 TIRES, TANDEM WALKING BEAM. 11'10" TRAVEL WIDTH.
   - TAG AXLE: NOT INCLUDED
   - AXLE JACKS: LIFT CONVEYOR TO MOVE AXLE BETWEEN
   - RADIAL AXLE: TRANSPORT AXLE MANUALLY SWINGS TO STACKING POSITION
   - RADIAL TRAVEL: SUPERIOR XTP DRIVE, WITH HYDRAULIC DRIVE ON (2) AXLES
   - FIFTH WHEEL: INCLUDED
   - ANCHOR PIVOT: ON-BOARD COUNTERWEIGHT, MAINTAINS TAIL END DURING RADIAL TRAVEL
   - BRAKES: COMPLETE AIR BRAKE PACKAGE
   - LIGHTS: BRAKE AND DIRECTIONAL SIGNALS
   - MUD FLAPS: INSTALLED BEHIND TRANSPORT WHEELS
   - HYDRAULIC LANDING JACKS: ONE SET, CONTROL VALVE, HONDDA POWER UNIT
   - TOWING EYE: ADJUSTABLE, FOR PIT TRANSPORT

CONVEYOR COMPONENTS

   - BELTING: 3-PLY 3/16 X 1/16 330 PIW
   - BELT SPLICE: FACTORY VULCANIZED BELT SPLICE
   - PRIMARY SCRAPERS: SUPERIOR EXTERRA® PRIMARY, ON MAIN AND STINGER
   - SECONDARY SCRAPERS: NOT INCLUDED
   - SUPERIOR IDLERS: CEMA C MOXIE®, 5" DIA. ROLLS, SEALED FOR LIFE BALL BEARINGS
   - LOAD AREA (MAIN): SUPERIOR SEAL SYSTEM, WITH 10" CARTRIDGES AND STEEL ROLLERS
   - TROUGH: 35° ON 4' SPACING
   - RETURNS: STEEL CANS, ON 8' SPACING
   - SELF-ALIGNING: STEEL CAN TROUGHING ALIGNER ON MAIN / SUPERIOR NAVIGATOR® ON STINGER
   - RADIAL HOPPER: ROCK BOX STYLE
   - GATHERING TROUGH: 6' LONG WITH ADJUSTABLE RUBBER FLASHING

CONTROLS

   - CONTROL SYSTEM: PILEPRO™ V11 AUTOMATION - POWER TRAVEL, CONVEYOR RAISE, AND STINGER EXTENSION
   - CABLE CARRIER COVER: PROTECT CARRIER FROM FUGITIVE MATERIAL
   - MATL. FLOW SWITCH: NOT INCLUDED, REQUIRES PILEPRO AUTOMATION
   - WIRELESS REMOTE: OPERATES MANUAL HYDRAULIC FUNCTIONS FROM UP TO 1000' FEET AWAY
   - ZERO SPEED SENSOR: NOT INCLUDED
   - VOLTAGE: 480 V / 3 PH / 60 HZ
   - ELECTRICAL: ENCLOSURE WITH MAIN DISCONNECT, CIRCUIT BREAKER, AND STARTERS WITH ON/OFF PUSH BUTTONS TO CONTROL EACH ELECTRIC MOTOR
   
ADDITIONAL SPECIFICATIONS

   - STARTUP: ON-SITE TRAINING NOT INCLUDED
   - GUARDING: FOR DRIVE AND TAIL PULLEYS, V-BELT DRIVE AND RETURN IDLERS. GUARDS MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO HAVE GUARDING INSPECTED
   - PAINT: 1 COAT PRIMER, 1 COAT FINISH ENAMEL SUPERIOR ORANGE
   - IDLER PAINT: POWDER COATED SUPERIOR ORANGE