2021 Superior POWERSTACKER 36x125 Conveyor

SUPERIOR 36” X 125’ PORTABLE POWERSTACKER® CONVEYOR

CONVEYOR FRAME

- MAIN FRAME: 36” DEEP TRUSS
- CHORD ANGLES: 4” X 3” X ¼”
- BOTTOM CHORD ANGLES: UPSIZED BETWEEN PINPOINTS TO 5” X 3” X 1/2”
- LATTICE MEMBERS: 1-3/4” X 1-3/4” X 3/16”

DRIVE SPECIFICATIONS

- DRIVE: CLASS I SINGLE WRAP
- GEAR REDUCER: DODGE SHAFT MOUNT
- BACKSTOP: INSTALLED IN REDUCER
- MOTOR: 50 HP 1800 TEFC
- V-BELT DRIVE: WITH DRIVE GUARD
- CAPACITY: 850 STPH OF 100 PCF MATERIAL, 25° SURCHARGE (90% FINES, 10% SPHERICAL LUMPS, 7” MINUS)
- BELT SPEED: 400 FPM
- DRIVE PULLEY: 24” DIAMETER, 3/8” HERRINGBONE LAGGED DRUM
- TAIL PULLEY: 16” DIAMETER, CEMA CHEVRON® PULLEY
- SNUB PULLEY: 20" DIAMETER, CHEVRON® PULLEY
- HEAD PULLEY: 18" DIAMETER, PLAIN STEEL DRUM
- SHAFTS: TURNED AND POLISHED
- BEARINGS: DODGE
- TAKE-UP: SCREW TYPE
- *4 WD: 4-WD, 2 HP PLANETARY DRIVE ON EACH WHEEL
- *VULCANIZED SPLICE: FACTORY VULCANIZED BELT SPLICE

PORTABILITY

- CONVEYOR SPLICE: HYDRAULIC TOP FOLDING HEAD AND TAIL
- UNDERCARRIAGE: HYDRAULIC RAISE, WITH 7.5 HP ELECTRIC PUMPING UNIT
- AXLE TYPE: SUPERIOR'S PATENTED FD40 SERIES AXLE
- TRANSPORT AXLE: EIGHT 11R-22.5 TIRES ON WALKING BEAM
- RADIAL AXLE: FOUR 385/65R-22.5 TIRES MOUNTED ON HYDRAULIC OUTRIGGERS
- COMP. LINKAGE: NOT INCLUDED
- RADIAL TRAVEL: (4) 2 HP PLANETARY DRIVE (4-WD)
- FIFTH WHEEL: FOR ROAD TRAVEL, BOLT ON DESIGN
- ANCHOR PIVOT: MAINTAINS TAIL END DURING RADIAL TRAVEL
- BRAKES: INCLUDED WITH FD AXLE
- LIGHTS: BRAKE AND DIRECTIONAL SIGNALS
- MUD FLAPS: INCLUDED WITH FD AXLE
- *LANDING GEAR: 2 SPEED CRANK-DOWN, FOLD-UP DESIGN
- TOWING EYE: PINTLE TYPE HITCH

CONVEYOR COMPONENTS

- *BELT UPGRADE: 3-PLY 3/16 X 1/16 330 PIW
- BELT SPLICE: FACTORY VULCANIZED SPLICE
- BELT RETAINER: RETAINS BELT WHEN FOLDING CONVEYOR
- *PRIMARY SCRAPER: SUPERIOR EXTERRA® PRIMARY BELT SCRAPER
- RETURN CLEANER: SUPERIOR V-PLOW UHMW BLADE
- *SUPERIOR IDLERS UPGRADE: CEMA C, 5” DIA. STEEL ROLLS, SEALED FOR LIFE BALL BEARINGS
- IDLER SEAL: STANDARD SPINGUARD® SEAL
- LOAD AREA: 20° TROUGH, 16” SPACING
- TROUGH: 35° ON 4’ SPACING
- RETURNS: STEEL CANS ON 10’ SPACING
- RADIAL HOPPER: SLOPED, 5' LONG, BOLT ON DESIGN
- GATHERING TROUGH: 5’ LONG WITH ADJUSTABLE RUBBER FLASHING

ADDITIONAL SPECIFICATIONS

- GUARDING: FOR DRIVE AND TAIL PULLEYS, V-BELT DRIVE AND RETURN IDLERS. GUARDS MAY NOT MEET ALL LOCAL CODES; CUSTOMER RESPONSIBLE TO HAVE GUARDING INSPECTED
- VOLTAGE: 480 V / 3 PH / 60 HZ
- CORD: ADDITIONAL POWER CORD INCLUDED
- ELECTRICAL: CONTROL PANEL AND WIRING INCLUDED
- PAINT: 1 COAT PRIMER, 1 COAT FINISH ENAMEL, GRAPHITE GREY (12-00636)
- GUARD PAINT: ORANGE
- IDLER PAINT: POWDER COATED SUPERIOR ORANGE

- PATENTS: UNIT INCLUDES PATENTS
- OWNER’S MANUAL: (1) COPY INCLUDED FOR OPERATION, MAINTENANCE, AND PARTS