The TS50R features low effort pilot controls for reduced fatigue and greater productivity. While its compact dimensions make it easy to transport and well suited for the farm, landscapers, general contractors, and rental applications.
ENGINE
EPA Interim Tier 4 Compliant
Engine Driven Fan
Swing Out Cooling module
Dual Element Air Filter
Available Engine Block Heater
ELECTRICAL
Machine Monitoring System w/ Tachometer, Fuel and Coolant Temperature Gauge
12 volt System with 65 amp Alternator
Halogen Work Lights: Front and Rear
Hour Meter
Back-up Alarm
DRIVE TRAIN AND FRAME
Mechanical Faced Axle Seals
Hydrostatic Drive System
80 ANSI Chain
Offset Wheels are Reversible for Narrow or Wide Stance
Heavy Duty Tires
Available Over the Tire Tracks (OTT)
Available Two-Speed Travel
HYDRAULIC
Radial Lift Path with Rugged Loader Arms
Boom Float with Detent
Pilot Proportional Hydraulic Controls
Pressure Relieving Flat Faced Coupler Body
Auxiliary Hydraulic Pump Flow of 17.1 gal / min (65 L / min)
OPERATING PERFORMANCE
Loader Type Radial
Operating Weight 6,475 lbs (2,937 kg)
Tipping Load 3,000 lbs (1,361 kg)
Rated Operating Capacity 1,500 lbs (680 kg)
Bucket Breakout Force 3,900 lbs (1,770 kg)
Lift Arm Breakout Force 3,000 lbs (1,360 kg)
Traction Force 8,453 lbs (3,834 kg)
ENGINE
Make/Model Perkins / 404D-22 Naturally Aspirated
Tier Rating EPA Interim Tier 4
Cylinder/Displacement 4 / 135 in³ (2.2 L)
Horsepower 50 hp (37.3 kW)
Rated Engine Speed 2,800 rpm
Maximum Torque 105 ft-lb (143 Nm)
Engine Lubrication 11.2 qt (10.6 L)
Cooling System 14.0 qt (13.2 L)
Fuel Tank Capacity 25.0 gal (95.0 L)
Electrical System 12 volts / 65 amps
DRIVE TRAIN
Traction Drive Type Hydrostatic
Chain Case Bow Tie Drive System
Chain Size 80 ANSI
Wheel Size 10 x 16.5
Width Over Tires 66 in (1,676 mm)
Maximum Travel Speed
Single 8.2 mph (13.2 km / h)
Optional Two-Speed 11.7 mph (18.8 km / h)
HYDRAULIC SYSTEM
Hydraulic Reservoir Capacity 8.0 gal (30.2 L)
Auxiliary Hydraulic Flow 17.1 gal/min (65 L / min)
Hydraulic System Pressure 3,335 psi (22.9 MPa)
DIMENSIONS
Maximum Lift Height to Bucket Pin 9 ft 7 in (2,921 mm)
Dump Height Fully Raised 7 ft 3 in (2,210 mm)
Dump Reach Fully Raised 1 ft 9.7 in (552 mm)
Maximum Bucket Rollback at Ground 27°
Maximum Dump Angle Fully Raised 40°
Transport Length 11 ft 4.6 in (3,470 mm)
Machine Length 8 ft 6.5 in (2,604 mm)
Wheel Base 3 ft 4.6 in (1,031 mm)
Angle of Departure 28°
Ground Clearance 10.5 in (267 mm)
Overall Width - Wide Position 5 ft 6 in (1,676 mm)
Overall Width - Wheel Reversed 5 ft 0 in (1,524 mm)
Overall Height 6 ft 5 in (1,956 mm)