Caterpillar fork,bucket,coupler pack Fork

Description:

Coupler:
All of the pin holes on this coupler appear tio be in good shape. One
of the 4 lock wedge/cylinders is missing and the coupler was being
operated without it. The bottom of each pin eas, for the pin holes
where this coupler pins to the boom, has been "built up" (see photos).
This coupler is manufactured by Caterpillar
Weight: 3,700 lbs.

Fork Attachment:
This fork attachment has a carriage that is 10 feet wide. The fork
tines are 66 inches in length and are 8 inches in width. The RH
fork tine has been repaired, where it bends at a 90 degree angle (see
photos).
Weight: 8,000 lbs.

Bucket:
This bucket is 12 feet, 4 inches in width and has bolt-on cutting
edges. The current edges are worn and need to be turned. This
bucket has many cracks around the weldment for the coupler.
The cracks exist on both the outside and on the inside of this
bucket. Please reference photos to see them.
Weight: 10,700

Total combined shipping weight: 22,400 lbs.
Dimensions for shipping:
6 1/2 feet High, 7 feet Wide, 13 feet Long