Product Description
20'-40' City CB Tandem-CC402P5DF00
FET NOT INCLUDED IN THIS PRICE
Specifications
1. Function
Carries one (1) 20' or (1) 40' ISO container
Meets all TOFC, AAR, DOT, FMVSS, ISO, ANSI, SAE and TTMA specifications
2. General
Overall Length: 40'-8" extended / 30'-6" retracted (Excluded rear bumper)
Overall Width: 96" (Over tires)
Fifth Wheel Height: 47"±1"
Rear Deck Height: 48"±1"
Kingpin Location: 24" (From rear face of front bolster)
Axle Spread: 49"
Tandem Location: 29 1/4" (From rear axle center to rear face of rear bolster)
Tare Weight: 7,700 lbs. (±3%)
Gross Vehicle Weight Rating: 52,350 lbs for 20' container
71,550 lbs for 40' container
3. Steel Structure & Components
Material: High strength GR50,GR80.
Painting: E-coat primer (min. 20μm) and Powder coating topcoat (approx. 60μm). 7 years warranty
Topcoat color: Black RAL 9005
Main Beam: W12 @ 19lb/ft hot-rolled or fabricated H-beam, ASTM A572 Grade 50 or equivalent.
Extension Beam: Fabricated 8-1/4" × 5-1/4" "H" beam with 3/8" thick flanges
Locking System: Two (2) air operated locking pins, activation of locking pins through third gladhand on the front bolster.
Crossmember: Fabricated channel type not less than 3/16" thick.
Upper Coupler: 5/16" thick with 2" dia. drain holes, reinforced by 1/4" thick channel type kingpin supporters.
SAF-Holland, Jost or Wallace Forge 2" AAR certificated kingpin
Front Bolster: 8" wide × 10" high × 1/4" thick open section, w/ 3-1/2"chamfer in full length for gathering container in operation. One
piece corner casting welded on both ends.
Center Bolster: 5-7/8" wide × 3/8" thick top plate with 5" wide × 5" deep × 5/16" thick "U" type bottom channel.
Rear Bolster: 8" wide × 3/8" thick top plate with 6-7/8" wide × 8" deep × 1/4" thick "U" channel.
Rear Bumper: 4" × 4" square type step bar supported by H type posts.
Locking Device: Two (2) Buffers 1213 or Toca equivalent front locking pins on front bolster
Two (2) Buffers 3843R or Toca equivalent on middle bolster
Two (2) Buffers 1207 or Toca equivalent twist locks on rear bolster.
Landing Gear: JOST A440 series landing gear with 62,500 lbs capacity,2-speed 17" travel, 10 years warranty. Low profile sand shoe
with solid axle.
Roadside crank handle.
Suspension: Hutchens mechanism tandem suspension with high arch 3-leaf spring 354-00.
Axles: Meritor 5" round axles with 22,500 lb capacity, 71-1/2" track with intermediate long 28 spline cam shaft
16 1/2" X 7" Q+ Brake
Hub & Drum & Lubricant: Meritor seal, Chevron Delo SF grease with Meritor hubcap
10 stud hub piloted hubs with outboard mounting cast steel drum.
Rims: Jingu 8.25 x 22.5 steel, hub-pilot disc wheels with 5 hand holes or Accuride equivalent, White
Tires: Westlake 295/75R22.5 tubeless type, 14 ply, CR915 or Ling Long, Goodyear equivalent
Brake System: Wabco 2S/1M ABS brake system, spring brake priority
Haldex type 3030 2.5" stroke brake chamber or TSE equivalent.
Haldex 28 spline, 5.5" automatic slack adjusters or TSE equivalent.
Hoosier air tank or Sanborn equivalent
Phillips 12-0081/12-0061 gladhand
Gladhands should be mounted straight up and down.
Electrical: Truck-Lite or Phillips 12 volt LED lighting system with Phillips modular wiring harness.
Connectors for GPS and PSI are available in the harness.
Phillips harness with integrated Phillips 16-724 receptacle
Pintle Hook Available: No
Genset Available: No
MISC: CIE standard marking
Conspicuity tape
Document holder
24" x 30" mud flap with CIE logo
Option :
(Not included, available upon
request)
PSI tire inflation system, with LED indicator lamp. With Thermo-Alert.
Hubodometer, Digital data trac in KM, mounted curbside front axle
THE NATIONWIDE HAUL EDGE
- We finance All Equipment! Even if you didn't buy from us!
- Free Trucking Insurance Quote & Policy review for all Customers
- DOT for Life - All equipment we sell gets a free DOT Inspection for lifetime
- Extended Warranty options on All Equipment
- GAP Insurance & Roadside Assistance is Available
- We accept all Trade proposals and pay top dollar!
- Free TCS Fuel Card (Save an average of 42 cents Per Gallon)