2025 ALDURA 165BBL Vacuum Tank Trailer

New Aldura 165bbl Alum Vacuum Trailer with side walkway

Capacity: 6,930 gal. + 1% Expansion
Commodity: Transportation of oilfield fluids such as water, mud, oil field waste.
Pressure: Tested at 23 PSI
Relief Settings: 22 IN HG External, 17 PSIG Internal
Overall Length: 45 ft.
Height: 10 ft. 9 in.
Weight: 11,300 Lbs.
Width: 102 in
Material: Aluminum 5454H-32
Suspension: AMPRO Air Suspension
Baffles: Four (4) of 1/4 in. thk
Bulkheads: 3/8" Aluminum 5454H Non-code ASME Shape
Compartments: Single
Overturn Protection: Three (3), at front, middle and back of tank
Shell: 1/4" aluminum shell 5454H-32
Rings: Thirteen (13) rolled of 4"x2" C-channel profile
Welding: Inside and out, minimal tie-ins with mig welding
Connections: 4 in. vacuum female camlock fitting on middle top front bulkhead
Outlet: One (1) 6” valve and male camlock with end cap.
Shut Off: 4" Ball type primary in front manway and 4" ball type secondary 12 Gal. on driver's side front with drain.
Venting/Reliefs: 1-1/2 in. vacuum relief, 2 in. pressure relief, both located at the top front of barrel, 2 in. blow down line at rear
Axles: Two (2) 30,000 lbs. each, 120 in. wide, 77.5 in. track, 77.5” track, 15” Ride height, weld-on hangers, ferrous hub, cast drum, ABS.
Brakes: Air brakes with two boosters FMVSS-121, ABS 4S/2M Bendix anti-lock brake system
Bumper: 4 in. X 6 in. tube per DOT
Sub-frame: High Strenght Steel painted in aluminum color
Landing Gear: One (1) AMPRO28-JT
Tires: Eight (8) 11R X 24.5, All-Terrain
Wheels: Eight (8) All-Aluminum 24.5"
Upper Coupler: Bolt on adjustable 3/8" High Strenght Aluminum Steel Plate with 5/8" bolts
Access Ladder: One (1) safety driver side access ladder with handrails
Manways: Three (3) on top of the tank, and one (1) on the rear bulkhead. All of 20 in. aluminum domed style with plates swing bolts and wing nuts
Walkway: Driver side, with handrails, middle ladder, toe kicks, thru tread anti-slip walkway from the front to the top rear manway.
External Coating: Hempel two coats of polyurethane on an epoxy primer (4-6 mils DFT)
Internal Liner: Hempel 10-15 mil DFT epoxy liner
Paint Prep: All steel surfaces sandblasted
Conspicuity tape: 3M Per DOT
Hose Tray: 3/16"x 25ft formed hose tray with 1/4 in. supports on both sides
Fenders: Two (2) aluminum front fenders with mudflaps
Lights: Sealed harness with Optronics GloLights LED per DOT. Two rear work lights with integrated switch.
Mud Flaps: Four (4) anti-sail, front and rear
Tool Box: One (1) on driver's side (30 in. X 18 in. X 18 in.) with sealed and key-lock door
Vacuum Manometer: One (1) located in the rear
Fluid level: Tube-style sight glass with drain in the rear of the trailer.