2023 Superior 6203HPSP Screening Plant

2023 Superior Guardian 6203 Horizontal Screen Portable Plant SN: 2387436

• Guardian 6X20 3-deck horizontal screen

• Operates in a true horizontal position

• Bottle Jack Lift Points

• Huck Bolt Fasteners

• Standard Coil Springs


PLANT SPECIFICATION

- CONSTRUCTION: MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL BEAMS
- DISCHARGE CHUTE: MANUAL ROLLAWAY CHUTE CONSTRUCTED OF 1/4" STRUCTURAL STEEL WITH 1/4" WELD-IN AR 400 LINER
- RUBBER FLASHING: NOT INCLUDED
- BLENDING CAPABILITIES: 1/4 PANEL BLENDING GATES IN DISCHARGE CHUTE SYSTEM
- TOP DECK DISCHARGE: OVER THE KINGPIN OR BLENDS DOWN TO BOTTOM DECK CROSS CONVEYOR
- MIDDLE DECK DISCHARGE: TO MIDDLE DECK CROSS CONVEYOR OR BLEND DOWN TO BOTTOM DECK CROSS CONVEYOR
- BOTTOM DECK DISCHARGE: TO BOTTOM DECK CROSS CONVEYOR
- WALKWAY: AROUND BOTH SIDES AND FEED END OF SCREEN; ENDS WHERE SCREEN MEETS DISCHARGE CHUTE
- WALKWAY ACCESS: TO BOTH SIDES OF CHASSIS WITH (2) VERTICAL SLIDING LADDERS
- ACCESS GATES: CHAIN SAFETY LATCH AT ALL WALKWAY ACCESS POINTS
- HANDRAIL: WELDED SQUARE HANDRAIL WITH TOE KICKS
- GREASE PACKAGE: REMOTE GREASE STATION, MULTIPLE GREASE POINTS OUTSIDE OF CHASSIS FRAME
- TOOL BOX: NOT INCLUDED
- CORD HOLDERS: NOT INCLUDED
- SAFETY TIEOFF: NOT INCLUDED
- CRIBBING STORAGE: NOT INCLUDED
- CENTERING HOPPER: NOT INCLUDED
- GUARDING: FOR ALL DRIVE AND TAIL PULLEYS, GUARDS MAY NOT MEET ALL CODES; CUSTOMER RESPONSIBLE TO HAVE GUARDING INSPECTED

CHASSIS SPECIFICATIONS

- AXLE: TANDEM AXLE WITH (8) 11RX22.5 RADIAL TIRES
- SUSPENSION: SPRING SUSPENSION
- BRAKES: COMPLETE AIR BRAKE PACKAGE
- FIFTH WHEEL: INCLUDED
- LIGHTS: BRAKE AND DIRECTIONAL SIGNALS
- MUD FLAPS: INSTALLED BEHIND TRANSPORT WHEELS
- CRIBBING LEGS: (4) FIXED STRUCTURAL STEEL CRIBBING LEGS
- LANDING GEAR: HYDRAULIC LIFT-ONLY LEVELING LEGS WITH 9 HP HONDA POWER UNIT
- TOW EYE: NOT INCLUDED
- LEVEL ASSIST: NOT INCLUDED

FINES HOPPER AND CONVEYOR

- HOPPER CONSTRUCTION: ¼” AR PLATE STEEL SIDES
- FINES HOPPER LINER: NOT INCLUDED
- GATHERING TROUGH: FULL LENGTH WITH ADJUSTABLE RUBBER FLASHING
- CONVEYOR SIZE: 48" WIDE FINES DISCHARGE CONVEYOR
- CONVEYOR CONSTRUCTION: STRUCTURAL STEEL CHANNEL MAIN FRAME
- DRIVE: CLASS I HEAD END
- GEAR REDUCER: SHAFT MOUNT
- MOTOR: 10 HP TEFC
- DRIVE PULLEY: 12" DIAMETER, 3/8" HERRINGBONE LAGGED MD DRUM
- TAIL PULLEY: 12" DIAMETER, CEMA CHEVRON® WING PULLEY
- BEARINGS: CLASS I, 30,000 L10 LIFE
- IDLERS: CEMA C, 5" DIA. ROLLS, SEALED FOR LIFE BALL BEARINGS, 20°
- BELTING: 3 PLY 3/16 X 1X16 330 PIW
- BELT SPLICE: FACTORY VULCANIZED BELT SPLICE(S)
- BELT SCRAPER: (1) EXTERRA PRIMARY SCRAPER PER CROSS CONVEYOR

SCREEN SPECIFICATIONS

- SCREEN SIZE: GUARDIAN 6X20 3-DECK HORIZONTAL SCREEN
- SCREEN DRIVE: RIGHT HAND
- CONFIGURATION: OPERATE IN TRUE HORIZONTAL POSITION
- SCREEN MOTOR: 1200 RPM 40 HP, TEFC, NEMA PREMIUM “DESIGN C” INCLUDED
- FOLDING MOTOR: NOT INCLUDED PLANT TRAVELS 12'6" WIDE
- SHAFT HOUSING PROTECTION: MILD STEEL PROTECTION CLAMPED TO SHAFT HOUSING
- SPRINGS: STANDARD COIL SPRINGS
- FEEDBOX: 24” FEEDBOX WITH ¼” AR LINERS

TOP DECK

- TOP DECK TYPE: HEAVY X-BRACE SINGLE CROWN DECK TO ACCOMMODATE 4’ SINGLE CROWN WIRE CLOTH MEDIA SECTIONS
- TOP DECK SCREEN MEDIA: SUPPLIED AND INSTALLED BY CUSTOMER
- TOP DECK TAKE UP: STANDARD TAKE UP RAILS
- TOP CROSS MEMBER PROTECTORS: NOT INCLUDED

MIDDLE DECK

- MIDDLE DECK TYPE: HEAVY X-BRACE SINGLE CROWN DECK TO ACCOMMODATE 4’ SINGLE CROWN WIRE CLOTH MEDIA SECTIONS
- MIDDLE DECK SCREEN MEDIA: SUPPLIED AND INSTALLED BY CUSTOMER
- MIDDLE DECK TAKE UP: STANDARD TAKE UP RAILS
- MIDDLE CROSS MEMBER PROTECTORS: NOT INCLUDED

BOTTOM DECK

- BOTTOM DECK TYPE: HEAVY X-BRACE SINGLE CROWN DECK TO ACCOMMODATE 4’ SINGLE CROWN WIRE CLOTH MEDIA SECTIONS
- BOTTOM DECK SCREEN MEDIA: SUPPLIED AND INSTALLED BY CUSTOMER
- BOTTOM DECK TAKE UP: STANDARD TAKE UP RAILS
- BOTTOM CROSS MEMBER PROTECTORS: NOT INCLUDED

ELECTRICAL SPECIFICATIONS

- VOLTAGE: 460 V / 3 PH / 60 HZ - 1800RPM
- CONTROL PANEL: SKID MOUNTED PANEL, WITH LIFTING EYES. TRAVELS ON PLANT AND REMOVED FOR OPERATION. INCLUDES STARTERS FOR ALL ON-BOARD MOTORS AND (2) ADDITIONAL #2 STARTERS AND NEMA RATED COMPONENTS
- WIRING: FACTORY SUPPLIED AND INSTALLED WIRING FROM PANEL TO ALL ON BOARD MOTORS. CUSTOMER RESPONSIBLE FOR WIRING POWER INTO CONTROL PANEL, AND ADDITIONAL STARTERS