Description: CASECO MASTER MECHANICS SERIES Model MM360 designed for 120" cab to axle cab and chassis and up to 60,000 ft. lb. corner mount crane. BODY SPECIFICATIONS: 120" cab to axle, 169" overall length, 96" overall width, 52" wide cargo area, 1st compartment on each side of body 60" tall and 26" deep (allowing for easy
conversion to Mechanic/Lube combination unit with internal storage for hose reels, evac pump, and used filter storage/drip pan assembly), remaining compartments are 22" deep, rear vertical compartments 50" tall, recessed integrated tie-downs in cargo area, compartment floors ribbed for rigidity, spring retention door keeps, 3-point stainless steel locks, rear grab handles, interior compartment lights, rubberized undercoating, sealer primed with Epoxy primer system.
Manual in/out, hydraulic up/down outrigger assembly.
24" workbench storage bumper designed for use with 60 series crane bodies. Bumper includes complete pass through storage area, 3/8" smooth plate top cover, 1 1/2" lip for clamping
purposes, integrated receiver tube assembly with safety chain hooks, and two bumper steps.
Shelf package designed for use with MM360 and MM370 Heavy Duty Crane Body: 1 adjustable shelf in curbside horizontal, 3 adjustable shelves in each 1st curbside door, OA bottle
mounts with material hooks in 3rd curbside compartment, 2 adjustable shelves in rear street-side compartment (positioned to bottom of compartment to allow installation of hose reel), 4
adjustable shelves in 3rd streetside compartment, 1 full width fixed shelf in front curbside and street-side compartments, and 1 bolt bin drawer with fixed shelf assembly in streetside
horizontal.
(2)7-drawer unit for 1st driver side or 1st passenger side compartment: 2 drawers 6" deep and 5 drawers 4" deep, all drawers mounted on 500# capacity slides, "L" handle center open mechanism with positive lock on each side, powder coated face plate (White), all other components of drawer unit galvanized construction, adjustable parts dividers in each drawer, and top shelf.
1/2" x 50' Air/Water Low Pressure Hose Reel Assembly.
1/2" Hose Guide & Roller Assembly - Installed in CASECO Body.
Install Hose Reel Assembly in Rear Streetside Compartment with Roller Feed Guide Out the Rear of the Body - Includes Mounting Bracket and Roller Feed Guide 1 1/2" x 50' Air Hose Reel Package Installed in Rear Streetside Compartment - Includes
Mounting Hardware and Hose Reel Guide Assembly for Rear Feed-Out of Hose.
GRACO 1/2" Filter, Lubricator, Regulator assembly.
20 Gallon Hydraulic Reservoir, Filter, Strainer, Hoses, Fittings.
Paint Includes Non-Skid Application in Cargo Area, Top and Back of Compartments and Top of Bumper.
Front cross-box assembly with angle design to transition from the truck cab to the front of the body. Provides additional storage capacity.
Stellar Model 10628 Service Crane with 55,000 ft-lb Capacity; 10,000lb Maximum Lift; 1,925lb Lift @ Full Extension: 28' 4" Hydraulic Reach (No Manual Extensions); 7-Function
Radio Remote Control; Planetary Winch with 60'/Minute Single Line Speed; Double Acting Cylinders with Integral Holding Valves; Crane Hook; Snatch Block; Anti-Two Block Device;
Hydraulic Overload Shutdown; Painted White; Requires 7 - 10 GPM @ 3,000 PSI.
Switch Panel with Mounting Bracket.
SRS-40, Rotary screw air compressor assembly including rotary air end, air filter, cooler, air/oil separator, pressure switch w/solenoid, hydraulic motor, hydraulic cooler, valve block with pressure relief, metal enclosure with gage panel. Requires auxiliary tank. 40 CFM @ 150 PSI max.
22 Gallon Air Tank - w/ Fittings; Hose Kit; Mounting Brackets - Painted Black.
Spring work on crane side of chassis to adequately level body and crane on chassis.